http://www.ecpur.com/itm/2220.html
This is hot products CO2 Laser engraver and cutter instrument funding Carve and Insult for non-metal, such as rubber,ox horns, wood, plexiglass, atomic materials, crystal, bowlder, etc...
http://www.ecpur.com/images/40w-laser-engraving/laser-engraving-cutting_6.jpg
http://www.ecpur.com/images/40w-laser-engraving/laser-engraving-cutting_7.jpg
http://www.ecpur.com/images/40w-laser-engraving/laser-engraving-cutting_10.jpg
You can handily to shoot up this gang fitting for cutting wood, plexiglass, making models.
carving rubber stamp ,carving wood dog nickname
Laser Type : CO2 Gas
Laser Power : 40W
Tube Trigger Volt : 20KV
Tube Operating Volt : 15KV
Current : 0-22mA
Interface to Computer : USB Port
Maximum Item Size to Engrave : 320mm * 220mm * 70mm (12.6W * 8.7L * 2.8H in )
Laser Tube (life hours) : 1100-1400 Hours
Engraving Speed : 0-350mm/s (0-13.8 in./s )
Cutting Speed : 0-35mm/s (0-1.38 in./s)
Minimum Shaping Character : 1mm * 1mm (0.04 X0.04in )
Resolution Ratio : 0.026mm (0.001 in ) / (1000dpi)
Resetting Positioning : ≤0.01mm (0.0004 in )
Motor Type : Stepper Motor
Software Supported : CorelDraw X4 and MoshiDraw 2013
Power Consumption : ≤250W
Operating Temperature : 0-45℃
Graphic Format Supported : .PLT / .DXF / .BMP / .JPG / .GIF / .PGN / .TIF etc..
Water Cooling : Water Pump include
Product Dimensions : 800mm * 500mm * 250mm (31.4in * 19.6in * 9.8in.)
Recommended Leisure Parts / Consumables Laser Tube, Centred lens, Cogitation lens
*Co2 lasers will rating bare metals when coated with a metal marking solution.
LMM Coated Metals are metals that partake of been sprayed with an LMM or Laser Marking Documents Spray. Typically a CO2 laser engraver like the a person sold here choice not engrave on metals unless it is painted metal. However, LMM sprays clothed recently been introduced to the customer base and if cast-off correctly, drive sanction a CO2 laser engraver to engrave on tons types of metal. We do not sell LMM shower but you can find it on the internet. However, we dont guarantee LLM spray desire spur as we do not fabricator it. It would be up to you to learn how to permit it. We do not accept returns on this component an eye to the fitting of it did not impress on metal.
CO2 Laser engraver and cutter machine is in use accustomed to for wood or penetrating of non-metal materials: such as rubber,ox horns, wood, plexiglass, atomic materials, crystal, bowlder, etc... Scornful thickness: 0-10mm (depends on another materials)
